NAD D3045

The NAD D 3045 is everything a modern amplifier should be; Compact, energy efficient, powerful, quiet, high-resolution capable and packed with cutting-edge features like DSD and MQA playback.

NAD's expertise in digital and analog engineering is on full display in this flexible and affordable amplifier.

We've included all the inputs and circuitry necessary to listen to all of your current music, while having the ability to fully exploit today's best high-resolution sources.

Especially notable is the asynchronous USB input for connecting a computer which allows for high-resolution streaming using one of several high-resolution programs such as Roon or JRiver.

Asynchronous operation uses the D 3045's precision clock (rather than the PC clock) to reduce jitter to a minimum and make the USB format work ideally for audio. For everyday convenience, we've included Bluetooth wireless streaming with aptX HD, the latest 24-bit high-resolution version of Bluetooth that's compatible with more and more phones and tablets.

Additionally, if you have Bluetooth headphones, you can also stream your non-Bluetooth sources wirelessly to your headphones, or you can connect your wired headphones to enjoy the exceptional performance of our high-impedance, high-current headphone amplifier.

The D 3045 features NAD's super-precise, wide dynamic range Moving Magnet Phono preamp to extract every last morsel of sound from your LPs.

If you still play CDs, we have both analog and digital inputs. The digital inputs allow the use of the advanced high-resolution DAC built into the D 3045. You can even send your TV's sound to the NAD and control the system seamlessly using your TV's remote control taking advantage of the HDMI ARC input.

Complete your system by adding a subwoofer with the convenient Sub Out connector.

• 2 x 60W hybrid digital amplifier
• Two-way Bluetooth with Qualcomm aptX HD audio
• Asynchronous 24/192 USB input compatible with MQA and DSD
• HDMI Audio Return Channel
• Coaxial and optical input
• MM Phono and line input
• Preamplifier
• No subtitles
• Headphone amplifier
• IR remote control
• Dimensions: 70 x 235 x 265 mm
• Net weight: 3.6 kg

• THD (20Hz - 20kHz): <0.003% at 2V output
• Signal to noise ratio: > 100dB (IHF, A-weighted, ref. 500mV, unity gain)
• Channel separation: > 85dB (1kHz) / > 80dB (10kHz)
• Input impedance (R and C): 47kohms + 220pF
• Maximum input signal: > 5.5Vrms (ref.1.1% THD)
• Output impedance: 400 ohms
• Input sensitivity: 82mV (ref.500mV output, maximum volume)
• Frequency response: ±0.2dB (20Hz - 20kHz)
• Maximum voltage output - IHF load: > 4V (ref.1.1% THD)

• THD (20Hz - 20kHz): <0.015% at 2V output
• Signal to noise ratio: > 82dB (200 Ohm source, A-weighted, ref. 500mV) / > 76dB (MM cartridge source, IHF; A-weighted, ref. 500mV)
• Input sensitivity: 1.35 mV (ref. 500 mV output, maximum volume)
• Maximum input signal at 1 kHz: > 90mVrms (ref. 0.1% THD)
• Frequency response: ±0.3dB (20Hz - 20kHz)

• THD (20Hz - 20kHz): <0.003% at 120mW
• Signal to noise ratio: > 90dB (32 Ohm load; A-weighted, ref.500mV output, unity gain)
• Frequency response: ±0.3dB (20Hz - 20kHz)
• Output impedance 2 Ohms: Maximum headphone output - 32 ohms load <8V (ref.1.1% THD)

• Continuous output power into 4 and 8 ohms: 60W (ref. 20Hz-20kHz at 0.03% THD, both channels controlled)
• THD (20Hz - 20kHz): <0.005% (at 1W, 4 and 8 ohms)
• Signal to noise ratio: > 98dB (A-weighted, 500mV input, ref. 2.828V into 4 ohms)
• Cutting power: > 80W (at 1kHz 4 Ohms 0.1% THD)
• IHF dynamic power: 8 ohms: 80 W / 4 ohms: 150 W / 2 ohms: 200 W
• Peak output current: > 18A (in 1 Ohm, 1ms)
• Damping factor: > 300 (ref.8 ohms, 20Hz to 6.5kHz)
• Frequency response: ±0.3dB (20Hz - 20kHz)
• Channel separation: > 75dB (1kHz) / > 70dB (10kHz)
• Input sensitivity: 260 mV (for 30 W into 4 ohms)
• Sample rate: up to 24 bit / 192kHz (digital source) / up to 24 bit / 384kHz (computer source)
• Power reserve: <0.5W